Micromax Q398 flash file

How to update Micromax Q398 Canvas Power 2?

To update the Micromax Q398 Canvas Power 2 you need to install an alternate firmware (ROM).

If the device does not automatically update by itselves. You can use the new firmware for your smartphone.

You have to choose the firmware version and follow the instructions. If you have a trouble in update you can write about it in the comments below, we’ll help you.

Micromax Q398 flash file:

• Micromax Q398 Canvas Power 2 update – clean official firmware for TWRP (OS 6.0)

Micromax update

There are four ways Micromax update:

1. Using recovery (to update installed OS)
2. Using Fastboot (to recover Micromax with Qualcomm SOC)
3. Using Research Download (to recover Micromax with Spreadtrum SOC)
4. Using SP Flash Tool (to recover Micromax with MTK SOC)

If you want to install a Micromax update using recovery – download the official update, reboot your phone or tablet into recovery mode and click “Install update from SD card”.

Micromax updateMicromax update

To install Micromax update with Fastboot – download and install drivers and ADB&Fastboot, download official firmware and flash it by instruction.

Install custom Recovery

To install custom recovery, it is not necessary to have root access. Using your PC and your debugging mode, you can install custom recovery manually using the instructions below.

If you know how to flash the phone using the SP Flash Tool, then there will not be much new information for you. Download and install the SP Flash Tool and drivers for your phone. Now you need to download the Recovery for your device, after the download, save your new recovery in a convenient place:

1. Launch the Flash Tool and immediately in the settings, tick the “DA DL ALL WITH Check Sum”
2. Then click on “Scatter Loading” and select the Scatter file from the archive with the downloaded recovery, or take the Scatter from the official firmware
3. After that, you can click on the start and connect the phone in firmware mode
4. Done. Now you can install custom Recovery

After following the steps write please whether there were any difficulties.

Installing custom recovery on Samsung phones

Everything with “how to install Recovery with Odin” is almost the same as in the firmware of the smartphone. The main thing here is that you do not need root rights to install recovery using Odin:

1. Download Odin and drivers for your device, as well as an archive with recovery, you install this whole staff and launch Odin
2. Uncheck “Auto Reboot” and press “AP”, select the downloaded archive from Recovery and press start
3. Put the phone in the firmware mode, usually the volume down button, home and power, and connect it to the computer Odin will pick up the phone and fresh a custom recovery
4. In conclusion about how to install recovery with Odin, it is necessary at once to be loaded in CWM or TWRP, otherwise the system will restore the native

Did you install custom recovery? Or have some troubles? Write in the comments below!

Lineage OS Download & Install Guide

After making the decision, the first thing you need to do is study the Lineage OS Download & Install Guide.

First of all, you need to install the custom recovery, preferably the latest version.

Step-by-step instructions Lineage OS install:

1. Download the latest version of Lineage OS available for your device, you can do it on the official website or tell me what model do you have in the comments below
2. Download the GApps package, you need to choose based on processor architecture, version of Android and its capacity.
3. If you need Lineage OS root rights, you should also download Addonsu.zip here
4. Make a full backup of all important data
5. Copy all downloaded files to the card memory card/phone memory and reboot in the recovery mode
6. In recovery open the “Backup copy”, select all sections and confirm the creation of the system backup, at the end of the process copy the resulting archive from/sdcard/twrp/Backups, if something goes wrong you can restore your firmware in the same status
7. After the backup copy is created, go to the “Cleaning”, check the boxes System, Data, Dalvik Cache and Cache, and confirm file deletion
8. Return to the main menu and open the “Installation”
9. Select your firmware Lineage OS, click Add more zip and add GApps and addonsu.zip
   lineage on androidlineage on android
10. Check the box “Automatic restart”
11. Confirm the installation with a swipe
    be sure to wait till the installation process is accomplished! At the end of the process, the smartphone/tablet will restart and the Lineage OS will start, this process should not be interrupted
    lineage on androidlineage on android
12. Go through all the steps of the initial setup and enjoy using the device with the latest system

Hope you enjoy the Lineage OS download & install guide. What do you think of CyanogenMod’s successor? Share your impressions in the comments about Lineage for Android below!