How to update Firefly Intense Power?
To update the Firefly Intense Power you need to install an alternate firmware (ROM). If the device does not automatically update by itselves. You can use the new firmware for your smartphone.
You have to choose the firmware version and follow the instructions. If you have a trouble in update you can write about it in the comments below, we’ll help you.
Firefly Intense Power firmware:
Firefly update
There are three ways Firefly update:
- Using recovery (to update installed OS)
- Using Research Download (to recover Firefly with Spreadtrum SOC)
- Using SP Flash Tool (to recover Firefly with MTK SOC)
If you want to install a Firefly update using recovery – download the official update, reboot your phone or tablet into recovery mode and click “Install update from SD card”.
SPD Research Download how to use?
Research Download how to use instruction for Android update SpreadTrum based smartphones. First step to use the Research Download tool is make sure, that your smartphone used SPD processor.
After that, download the latest official firmware for Research Download tool in the .PAC format and save it to your PC. Make sure, that your smartphone or tablet have at least 50% charge of battery and follow Research Download guide:
- Download and unpack Research Download tool
- Install a compatible Research Download driver
- Run the tool
- Click on the first gear icon and choose your firmware
- Press “Play” button, if the warning window will pop up – press “Ok”
-
- Turn off your device, press and hold a volume up button and connect USB cable
- You can release the volume button when the program will start flashing
- When flash will be done you’ll receive window with status “Passed” or “Success”
- Press Stop button and close the program
- Disconnect your device and turn it on
Done! Now you know how to use Research Download Tool! Have some questions – write it in the comments below!
Read more
