How to update Huawei Y3C?
To update the Huawei Y3C you need to install an alternate firmware (ROM). If the device does not automatically update by itselves. You can use the new firmware for your smartphone.
You have to choose the firmware version and follow the instructions. If you have a trouble in update you can write about it in the comments below, we’ll help you.
Huawei Y3C software update (Y336-U02):
Huawei update
There are three ways Huawei update:
- Using recovery
- Using eRecovery
- Using SP Flash Tool (to recover Huawei with MTK SOC)
First of all – download a file for your model from the list below, save it to SD card or internal storage.
To run recovery mode for Huawei Android update:
- Power off your phone
- Press and hold volume up and power on buttons
- Choose “apply update from SD card”
- Wait until Huawei update will be installed.
Huawei Firmware
To flash Huawei firmware with erecovery mode follow the instruction:
- Download full Huawei firmware
- Unpack “dload” catalog into SD card
- Turn off your Huawei
- Press and hold both volume buttons and power on
- Phone will enter dload mode and automatically install Huawei update
SPD Research Download how to use?
Research Download how to use instruction for Android update SpreadTrum based smartphones. First step to use the Research Download tool is make sure, that your smartphone used SPD processor.
After that, download the latest official firmware for Research Download tool in the .PAC format and save it to your PC. Make sure, that your smartphone or tablet have at least 50% charge of battery and follow Research Download guide:
- Download and unpack Research Download tool
- Install a compatible Research Download driver
- Run the tool
- Click on the first gear icon and choose your firmware
- Press “Play” button, if the warning window will pop up – press “Ok”
-
- Turn off your device, press and hold a volume up button and connect USB cable
- You can release the volume button when the program will start flashing
- When flash will be done you’ll receive window with status “Passed” or “Success”
- Press Stop button and close the program
- Disconnect your device and turn it on
Done! Now you know how to use Research Download Tool! Have some questions – write it in the comments below!
Read more
