ZTE Blade A5 2019 firmware

How to update ZTE Blade A5 2019?

To update the ZTE Blade A5 2019 you need to install an alternate firmware (ROM).

If the device does not automatically update by itselves. You can use the new firmware for your smartphone.

You have to choose the firmware version and follow the instructions. If you have a trouble in update you can write about it in the comments below, we’ll help you.

ZTE Blade A5 2019 firmware:

• ZTE Blade A5 2019 update – official firmware (OS 9.0)

ZTE update

There are four ways ZTE update:

1. Using recovery (to update installed OS)
2. Using Fastboot (to recover ZTE with Qualcomm SOC)
3. Using Research Download (to recover ZTE with Spreadtrum SOC)
4. Using SP Flash Tool (to recover ZTE with MTK SOC)

If you want to install a ZTE update using recovery – download the official update, reboot your phone or tablet into recovery mode and click “Install update from SD card”.

ZTE updateZTE update

To install ZTE update with Fastboot – download and install drivers and ADB&Fastboot, download official firmware and flash it by instruction.

Android update

OS Android is the most popular operating system in the world. It’s all because the most of smartphones, tablets and other gadgets are running by Android OS. The resource play.google.com is a storage for millions of applications and games to suit all tastes. However, these applications and games usually adapted for a particular version of OS (mainly new). That why It’s becoming necessary to know how to update Android firmware.

First to understand how to update Android version, you need to:

• Own an Android smartphone or tablet
• Connect to the Internet via Wi-Fi or use Mobile Internet

Update your smartphone or tablet with the system automatically update tool:

1. Connect to Wi-Fi
2. Go to Settings
3. About phone
4. System update
5. Click “Check for updates”
6. If update available – click “Install”

Android updateAndroid updateAndroid update

Android update download list:

In the process of updating Android you may need advanced system settings.

SPD Research Download how to use?

Research Download how to use instruction for Android update SpreadTrum based smartphones. First step to use the Research Download tool is make sure, that your smartphone used SPD processor.

After that, download the latest official firmware for Research Download tool in the .PAC format and save it to your PC. Make sure, that your smartphone or tablet have at least 50% charge of battery and follow Research Download guide:

• Download and unpack Research Download tool
• Install a compatible Research Download driver
• Run the tool
• Click on the first gear icon and choose your firmware

• Press “Play” button, if the warning window will pop up – press “Ok”

• • Turn off your device, press and hold a volume up button and connect USB cable
  • You can release the volume button when the program will start flashing

• When flash will be done you’ll receive window with status “Passed” or “Success”
• Press Stop button and close the program
• Disconnect your device and turn it on

Done! Now you know how to use Research Download Tool! Have some questions – write it in the comments below!